User description

Saab 93 Key Fob Replacement

Saab keys could be expensive to replace. However the process is easy.

You'll require a phillips screwdriver with a flat head, and some patience. Put the screwdriver in the middle of the case, and slowly open it.

It is recommended to keep spare keys and fobs. They can prevent you from being stranded or paying towing charges.

How to replace a battery

Key fobs for cars that allow and lock the vehicle remotely contain a battery inside which will eventually die. With just a few steps, owners can replace the key fob's battery. The key fob is equipped with two plastic flaps on the one side that you have to lift to remove the battery and replace it with an alternative one. The standard CR1632 battery is used as a replacement. It is simple to install.

After you have removed the emergency key, you can use the flathead screwdriver on small pieces of wood to split the case. Be cautious not to press it too hard, since the components inside are delicate and could be damaged when you put too much pressure on it.

Saab created some fantastic automobiles. Many of them are still in use today. One of the big problems with these cars, however, is their ignition keys. The buttons can become stuck or fall off with time. If an Saab owner loses only one working key, it can be costly to purchase a second one at the dealership, since they will need to replace the entire computer module and then program it to the new key to convince the vehicle that you're not trying to take it. The good part is that you can save a significant amount of dollars by simply replacing the case instead.

How to Remove the Manual Key

Key fobs that allow you to lock and unlock your car have batteries in them and those batteries have a time-limit. If you're like most people, they will eventually expire. Fortunately, replacing the battery that controls your key fob is a breeze. The only problem with the procedure is taking out the old battery from the case. If you're patient and a flathead screwscrewdriver, you can do it.

After you've put in the new battery, it's now time to put everything back together. You'll need a flathead in order to open the case that replaces the key fob. Insert the screwdriver into the slot that is in the middle. Gently move the case until you are able to remove it.

If your old keyfob lost its connection to the safety system of your car and you need to change the program of the new one. You can do this by following the manual learning procedure to add a new key fob for your Saab 9-5. This method does not make any changes to previously learned keys. You can still use the same FOBs that you have, if you want to program them again. This process is only initiated by ensuring that the mechanical key of the vehicle matches the cut on the FOB.

How to Resolve the Case

Whether you're replacing the battery or the manual key it's best to replace the case too. The cases can get worn out quickly, especially after heavy use. It's simple to change the case of your SAAB 9-3, and you won't need any special tools.

The first step to change the case is to remove the manual key from the key fob. It is done by pressing the blue SAAB logo on the fob before pulling the manual key out. It is possible to apply a little force in order to remove the manual key from the fob.

Once you've removed the manual key, you're now able to start working on removing the electronic components from the case. To do this, you'll require an inexpensive flathead screwdriver. Be gentle with your screwdriver to avoid damage any electronics. After you've removed the electronics, you'll have to take the battery out. After you have replaced the battery, you can place everything back into the original case. You can buy cases for replacement on the internet for a very low cost.

How do you program the brand new key

All key fobs, that allow you to lock or unlock your vehicle remotely, come with batteries. However they are limited in their life span. It is crucial to replace the battery on your key fob every three to four years. Fortunately this is a simple procedure that can be completed at home. All you need is a little patience and an inexpensive screwdriver with a flat head.


The first step is to remove the manual key. Press the blue SAAB logo and pull the emergency key from the key fob. It might take some force but the key will be released easily. After you've opened the key fob, you are able to remove the battery by gently pressing the screwdriver in the slot that is in the middle. This will split the case, making it easier to access the electronic components.

Once you have the new battery and key fob case installed Now is the time to program the new key. This can be accomplished by following the steps in this YouTube video from YouTube Cyclone Cyd, a user on YouTube. This is a fantastic video channel that provides instructions on how to carry out basic maintenance and repair work on vehicles.

saab key fob replacement are a great way to keep an extra key in your car in case you lose or break it. You can purchase a replacement keyfob on the internet or from local locksmiths like United Locksmith. The cost is significantly less than if you purchase the key from a dealer. They will charge for the key and then program it into your car.