User description

How to Change a Dead Volvo C30 Key Fob

The Volvo C30 is an excellent car, but it has a few minor imperfections. The two front seats are comfortable, however the rear seats aren't as comfortable and the cargo space is a bit limited.

If your Volvo key won't turn it can be caused by a variety of issues. Certain keys require programming and should only be programmed by an auto locksmith.

How do I Change the Key Blade

If your Volvo key fob is not working due to a dead battery however, you might still be capable of unlocking your car with the mechanical blade inside. Most new Volvo vehicles have a hidden mechanical key that can open the door for the driver in the event of an emergency, if keys for the remote are not working. You can also use the mechanical key to turn on the vehicle provided that the push-start button on your Volvo is still activated by the sensor as you enter the vehicle.

To access the blade, place the fob with the right side facing up, and place the "Volvo Cars Logo" on it. Locate the small black button located at the bottom left of the key fob. Slide it downwards and to your right. volvo xc60 key fob will allow you to remove the cover and allow you to access the key blade that is hidden within.

The battery of the key fob is simple to replace. Slide the key fob away from the key ring and then lift the back of the cover to reveal the battery. You will notice that the battery is a standard CR 2032 watch-style cell. Replace the old battery with a new one. Be sure not to touch the + or poles of the battery with your fingers. These batteries can be found in a variety of pharmacies and stores.

How to Replace the Battery

The key fob houses a small battery that will need to be changed at some point in the ownership of your car. The fob comes with a blade that allows you to unlock the driver's door when the battery in the remote dies or keys are lost.

The battery can be replaced quickly, but take care not to damage the metal electrical contacts within the cover on the back of the fob. A small flathead screwdriver, or a plastic tool called a pry bar can be used to pry up the corner of the cover. After removing the cover you can change the battery by inserting a new silver button-cell (CR 2430 3-volt) with the "+" positive side facing downwards and the "" negative side towards yourself.

Once the new battery has been installed, the fob can be reassembled and the key blade is inserted. The alarm will be turned off by pressing the unlock button once. If you press it twice all doors will be unlocked and the tailgate will be opened if your car has one.

Many pharmacies and supermarkets sell batteries that are replacements. They are usually sold in the form of watch batteries and contain a list of numbers printed on the battery to help you identify it.

How to change the ignition cylinder

The ignition cylinders are essential for your Volvo to operate properly. They provide the energy to the various elements of the vehicle and enable it to start. In time, they'll wear out and require replacement. If your Volvo isn't getting started, or stops while driving, it may be necessary to replace the ignition cylinder.


If you're lucky, it could be an oversight you made wrong or made a mistake. You might not have removed the key completely, or it could be stuck inside the lock. You can try to release the key by gently shaking it, and then moving it around. However, avoid using too much force since it could break something inside the steering wheel or ignition switch.

The ignition switch may also be faulty. It's not unexpected that this switch will wear out with time, considering that it is used every day. In most cases, it will begin to fail in one of the settings that power devices or the ignition system, and then it can slow down. The ignition switch may stop working if it is near to fail. It is essential to test it as soon as you can.

The technician will look at the entire system to determine the cause of the issue. They'll examine the ignition cylinder, the key and other components of the security system. They'll also look at your wiring if you own an older car to determine if it's experiencing any problems.

How to Change the Remote

If you find that your Volvo key fob battery has died or you want to change it, there's an easy and quick method to do it. Make use of a flat screwdriver and remove the back cover of your key fob to swap the battery. A small grey button is located on the top right corner of the key fob, and it is possible to press it to open the cover and remove the battery cover. Then, you can remove the old battery and install the new one. This should only take about 30 seconds or less.

You can control the remote window roll-down feature of a newer Volvo using your Volvo keyfob. You can also shut the sunroof or windows using the lock button (if fitted). When you press the unlock button on the Volvo key fob for your SUV, the alarm will be disengaged and the driver's door will be unlocked. If you press it twice, it will unlock other doors and even the tailgate.

It's time to replace the remote key battery in the event that you see "REMOTE Key Battery Low Voltage" in your car's instrument cluster, or if the locks do not respond when you are within range. The replacement of the remote key battery is a simple and fast procedure that can be completed within a matter of minutes at home or through your local dealer.